Rain Bird median and Divider Bundles offer a range of benefits that can transform your gardening experience. With these bundles, you'll enjoy efficient watering systems tailored for optimal hydration and healthier plants. Invest in Rain Bird Flower Bed Bundles and elevate your gardening game effortlessly.
- Up to 60% water savings due to zero wind loss.
- No unisghtly run off or overspray in high visibility areas.
- No damage to walls, roadways and vehicles.
- No runoff = reduced liability in high traffic areas.
- Low maintenance results in labor savings.
TO DO LIST
- Assemble Control Zone Kit and connect to water source.
- Cut lenghts of XFD Dripline to build grid in planting area.
- Connect lenghts of XF Series dripline to Easy Fit fittings (or XF dripline 17mmm fittings) to create grid. Add
- Air relief valve Kit to the zone and connect to Control Zone Kit.
- Stake XF dripline in place
- Flush system until clean water flows.
- Install planting material.
INSTALLATION AND MAINTENANCE TIPS
- Flush the zone upon installation and 2-4 times a year.
- Install 1/2'' Air Relief Valve Kit at high point in the system.
- Leave XF Series Dripline coil in the sun while preparing installation.
- Use XFS Series Dripline to protect against root intrusion.
TIME
1 hr
TO DO LIST
- Trench, cut and glue laterals.
- Connect lines to water source.
- Thread 1800 series spray head into swing assembly then thread the swing assembly into the slip x slip x threaded Tee PVC fitting.
- Cut PVC laterals and glue in Slip x Slip x Threaded Tee assembly.
- Flush system until water flows clear (as needed).
- Install SQ Series nozzles on 1800 Spray Heads.
DRIP TIP
All SQ nozzles in the same zone should be adjusted to either 2.5'' or 4'' throw. DO NOT mix throw settings in the same zone.
INSTALLATION AND MAINTENANCE TIPS
- Flush the zone after installation and 2-4 times per year.
- Adjust watering time as seasons/weather changes.
- Ensure that all SQ Series nozzles are adjusted to the appropiate throw distance.
TIME
1 hr
TO DO LIST
- Assemble Control Zone Kit and connect to water source.
- Connect Easy Fit series for connection to Control Zone Kit.
- Cut lenghts of XF series dripline to assemble grid in planting area.
- Use Easy to Fit Compression Fittings or XFF Dripline fittings to create grid.
- Connect tubing to Xeri-Bugs Emitters, run lines and stake next to larger plants.
- Flush Zones until clean water flows.
- Install planting material.
INSTALLATION AND MAINTENANCE TIPS
- Flush the zone after installation and 2-4 times per year.
- Leave the XF Series Dripline coild in the sun while preparing for installation.
- Suplemental Xeri-Bug Emitters or Pressure Compensating Modules are placed next to larger plants with higher water requirements.
TIME
1 hr